Catch up Plus

[Jan-Horn]

I eventually decided to do a full reformat of the HDD and that solved the problem. CU and Box Office  are still populating but CU+ seem to be fully functional again  

hdd

[ltshizane_DStv1]

@Jan-Horn, we have responded via PM.~

[Jan-Horn]

---

@ltshizane_DStv1

It is now more than a month that I have no CU+ on the Explora 2A.

I have done all the suggested trouble shooting and checks suggested but Decoder support send through by you via PM and reported the results to you via PM. I have emailed you 2 and a halve hours of log data.  It seem that Decoder support will only respond when prompted by you and then only to repeat the suggestions given previously. Could you please escalate the problem to get it resolved.

As requested by decoder support via PM I have swapped the 2 decoders around and came across a software problem on the 3A which I reported with screen shots at https://community.dstv.com/t5/EXPLORA/New-Explora-software-updates/m-p/17073#M1284 but to date nobody even bothered to respond.

Apart from being frustrating I need to swap the decoders back or I will have to redo my cabling because to the lack of RF ports on the 3A

---

[Jan-Horn]

---

@ltshizane_DStv1 wrote:

Hi @Jan-Horn, please check your PM.~

I have replied to your PM. Please ensure that the information is passed on the the same person each time because I get the feeling that we are running around in circles because I am asked to repeat the tests that have been done and eliminated previously.  

---

[ltshizane_DStv1]

Hi @Jan-Horn, please check your PM.~

[Jan-Horn]

---

@Jan-Horn wrote:

---

@ltshizane_DStv1 wrote:

Apologies for the delay, we are following up.~

Any feedback ???

Any feedback to my response via PM regarding the suggested tests and info on Friday ????

---

---

[ltshizane_DStv1]

@Jan-Horn, please check our response in your Inbox.~ 

[Jan-Horn]

---

@ltshizane_DStv1 wrote:

Apologies for the delay, we are following up.~

Any feedback ???

---

[Jan-Horn]

---

@ltshizane_DStv1 
Something you may bring to the attention of the Techies
You may or may not be aware that some are experiencing freezing of both video and audio on Some Explora models. Occasionally the decoders would display a no signal error. 
I have  been able to narrow down the time of these incidences to around 10 minutes to the hour.
A few days ago I noticed that the timing very closely coincides with the VOD updates and decided to monitor that more closely rand can confirm that the freezing/no signal incidences match the VOD update times exactly.
This may or may not have any relation to my CU+ problem but I think it is worth passing on
See my screen shot  

---

[ltshizane_DStv1]

Apologies for the delay, we are following up.~