Welcome to EXPLORA

cancel
Showing results for 
Search instead for 
Did you mean: 
Need help?

Explora 3A Explora 2A

SOLVED
2 REPLIES
Doin' it 4 Tv

Re: Explora 3A Explora 2A


@GeoffD wrote:

Suggest you post this in the closed group. MCA-David will have a look at it there.

 

In theory, all you can do is do this via HDMI distribution or via an RCA to RF remodulator external to the decoders.

 

Will do that 


 

Explora 2A (primary) Explora 3A Secondary SLNB LMX501  Samsung S6   Samsung Tab
BoxOffice

Re: Explora 3A Explora 2A

Suggest you post this in the closed group. MCA-David will have a look at it there.

 

In theory, all you can do is do this via HDMI distribution or via an RCA to RF remodulator external to the decoders.

Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
Highlighted
Doin' it 4 Tv

Explora 3A Explora 2A

The question is with an Explora 2A (Primary) Explora 3A (XV) installation, decoders in different rooms how to connect up so that  either decoder can be viewed and controlled from each room. The Explora 2a can feed through the RF out to the other room with a tv eye link to control the 2A but what do you need for the Explora 3A. With no RF ouput the signal will have to be via HDMI?

The installation of the 3A would be straight forward as the current combination is Explora 2A Pace HD PVR 2P ans SLNB. 

 

 

Explora 2A (primary) Explora 3A Secondary SLNB LMX501  Samsung S6   Samsung Tab