Welcome to EXPLORA

cancel
Showing results for 
Search instead for 
Did you mean: 
Need help?

Explora 3A as primary connected with Explora 1 and Explora 2

1 REPLY 1
Red Carpet

Re: Explora 3A as primary connected with Explora 1 and Explora 2

You require a diplexer installed behind the 3 A to extract HB to feed the decoder that is on a separate antenna. The other decoder will be able to get HB via the SLNB.

Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
Viewer

Explora 3A as primary connected with Explora 1 and Explora 2

Good day

 

I'm replacing my Explora 2 with an Explora 3 as the primary decoder. This is connected to an Explora 1 and another Explora 2.

 

Noticed there is no RF Input or output port on the Explora 3.

 

Just want to mention the Explora 3 and Explora 2 are on the same dish with a smart lnb. The Explora 1 is on separate dish with a twin lnb. All were connected previously via heart beat cable.