So I did the above unplugged restarted, it's now showing me network setup and I cant select or ok anything
Error code 0000 on the hd pvr decoder reboots but comes up with network setup did all the above unplugged as well
Switch off all power to the decoder, wait a minute or so, and then plug in again. Let the decoder reboot. If it does not startup, the decoder is faulty and has to be replaced.
Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM