Hi, not all channels about 15 channels.
In your case it sounds like it could be an alignment problem.
The Mods here aren't usually able to help with more than the basics, and I doubt you'll find other MC helpers can with an installation concern either.
So maybe get an installer in, or if you want to do it yourself send a PM to GeoffD (he's another customer).
That's all from me.
Avoid more than hand-tightening connections which can cause dry solder joints which can have this symptom, we see it every winter. Can just be faulty circuitry as well, or even maybe something else.
How old is the decoder(s), LNB (thingie on the dish) and cabling involved?
(Any more will be from others.)
I'm getting Error code E48-32, strange thing it works fine the whole day until around 9.30pm at night.
Also only on some channels do i get the error.
Which decoder please make and model number.
Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
This is crazy, I have the same problem and Customer service couldn’t help. It was as if this is the first time they heard of such an issue. Please help!!!