The switches must be cascaded exactly 1-1 in a straight line. All four connections for full functionality.
What is much more important is that the first switch MUST be connected to the correct LNB ports and all 4 MUST be connected to the LNB. IF the LNB is a Universal Quad LNB, the order does not matter, BUT if it is a Quattro LNB then the connections MUST match the LNB.
The switch does not determine the UB settings on the decoder at all.
The decoder must be set up and the settings saved and checked by rebooting the decoder to verify if the settings are correct.
Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
I need help with cascading two 5-3 switches. The 2nd switch is connected via universal ports. It's blue, even changed UB but get a message of signal. I did reset the decoder. Just not accepting the UB, even the default