Welcome to Installation

cancel
Showing results for 
Search instead for 
Did you mean: 
Need help?

How to link up 3 DSTV decoders

1 REPLY 1
Red Carpet

Re: How to link up 3 DSTV decoders

Check what the network settings for each of the other decoders are and then make sure you select UBs and frequencies that do not clash with those used by the other two decoders.

 

Bets to use the quick setup wizard, and set the Primary decoder to use decoder 1 settings, the second Explora to use decoder 2 settings, and the new decoder to use decoder 3 settings.

Then we can get into possible HB issues.

 

Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
New poster

How to link up 3 DSTV decoders

I have the first 2* Explora decoders, which has been working perfect for the past 2 years or so, and then I recently bought a new HD decoder, which is now connected on the C label of the SLNB, but I somehow don’t get signal, in actual fact I do, but it constantly loses it, and that also affect the other decoders signal. What is the correct way to do this?