Welcome to Installation

cancel
Showing results for 
Search instead for 
Did you mean: 
Need help?

TRIPPLE VIEW SETUP

SOLVED
1 REPLY 1
Red Carpet

Re: TRIPPLE VIEW SETUP

The decoder has somehow defaulted back to network defaults. Check each decoder network settings. Explora 1 primary set to decoder 1, first series 5 to decoder 2, and the third to decoder 3 settings.

Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
Highlighted
ARN
Doccie

TRIPPLE VIEW SETUP

GOOD DAY I PLEASE NEED ANY ADVISE ON HOW TO CONNECT EXPLORA 1 AND 2 MODEL 5u DECODERS. MY SETUP LOOKS LIKE OUTSIDE 80cm DISH, SLNB EVERY DECODER IS WIRE UP FROM PORT A,B AND C(unicable ) then at the back of the explora on rf out port i use one duplexer for feed back to slnb for heartbeat of both model 5 decoders. The one model 5 was playing for one week now all of sudden no signal.