Welcome to Installation

cancel
Showing results for 
Search instead for 
Did you mean: 
Need help?

Tripple view setup

SOLVED
4 REPLIES 4
Anime

Re: Tripple view setup

Pardon - typing error! The SLNB is in fact a LMX501.

Highlighted
Anime

Re: Tripple view setup

Pardon. Typing error. The SLNB is in fact a LMX 501.

Red Carpet

Re: Tripple view setup

Never heard of an LMX 503.  What does it have?  Can you post some more detail, please?

LMX 500 --  4 Unicable plus 2 Universal ports. - Can support 3 decoders in XV

LMX 501 --  3 Unicable plus 1 Universal port. - Can support 3 decoders in XV

LMX 502Z -- 2 Unicable ports. --- Can't support 3 decoders in XV

LMX 502W -- same as the 502Z. (Z for Zinwell, and W for WNC, 2 manufacturers)

But assuming it has 3 available Unicable ports, then the connections are straight forward, just make sure the Primary decoder is connected to port A and each decoder is set to use a different set of UBs and associated frequencies, quick setup decoders settings, 1 - Primary and 2, 3 for the secondary decoders.

 

The Explora 1 will require a diplexer behind it to be able to inject HB on to the Unicable cabling.

 

 

Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
Showmaxed

Re: Tripple view setup

Never heard of a LMX 503... if it's like the LMX 502A, or worse, it won't do enough for your needs as your decoders would need 3 x Unicable ports. If no good best to try find a LMX 501 (or 500), then ask again.

 

That's all from me.

Anime

Tripple view setup

Kindly advise on tripple view setup with the following components:

1. 80cm dish

2. SLNB LMX503

3. Explora 1

4. Explora 3A

5. Explora 3A