According to MC, yes it will work as connected. The only thing you need to ensure is that the two decoders use a different set of UBs because these decoders do not like to share userbands.
Set the Primary to use the decoder 1 settings and the secondary to use decoder 2 settings if you use the wizard.
If you use the manual settings then the default UBs are 0,1,2 with their associated frequencies ( decoder 1 on the wizard)
and then UBs 5,6,7 ( decoder 2 on the wizard)
or even UBs 3,4,8 (decoder 3 on the wizard)
Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM
Need more advise on xtra view set-up of two model 5s decoders. My set-up looks like a SLNB the one with two unicable ports than a wire to each decoder. One as primary and other one is my secondary and thats it. My question will it works or not thanks.
Solved! Go to Solution.