MC just can't leave working systems alone especially the older PVRs.
So this morning, I wake up to find that today's maintenance reboot cr@p has again broken my setup. The Secondary decoder with an old Zeta +2 SC works fine.
BUT the Primary with the new version 7 Premium N crad is broken!
It never fully recovered from the reboot.
Recordings set for the morning failed, and the decoder would not respond to remote commands or FP commands (Yes there are many such commands available, but very complicated FP button sequences, only suitable for use in emergencies).
So, more proof that virtually ALL the issues we have are related to the continuous stream of tamperingvwith the SCs that goes on.
A reboot by cutting the power was all that worked to get service back on that decoder.
Octo LNB; 2 by 2x4 MS; 2 by ES 5-2; Dedicated PSU for LNB, ES's, MS's; HD PVR 4P x 2; Explora 1; DSD 660; FSM